Protects your starter battery
Instead of draining the vehicle battery during parking mode, the 6200LFP PLUS powers the dash cam from its own LiFePO4 pack once the engine is off.
Automotive-grade LiFePO4 dashcam power bank
Power Core 6200LFP PLUS
Power Core 6200LFP PLUS
Dashcam Power Bank
Protect your car battery during parking.
Independent power for dashcam parking mode. Fast recharge while driving, stable output when parked, and a purpose-built LiFePO4 platform made for real automotive use.
- No starter battery drain during overnight or daily parking recording.
- Hardwire or cigar charging restores useful runtime even on short trips.
- Active balancing, pass-through charging and wide 5V–32V input for installer-friendly integration.
79.36Wh energy (6200mAh @ 12.8V)
0–100% in ~50 min
Pass-Through Charging
5,000+ LiFePO4 cycles
LiFePO4 4S Pack
110W charging (5A / 8A)
2Years warranty
Made in Germany
£189 incl. VAT
Free DHL shipping
2-year warranty
Made for parking mode
In stock
Free EU DHL shipping
Parking mode ready
Dedicated auxiliary battery for cleaner, longer and safer dashcam parking coverage
€189
inc. VAT
- Availability In stock
- Delivery 3–5 business days
- Shipping Free EU shipping by DHL
- Warranty 2 years
- Tax No extra VAT / duty in EU
- Origin Made in Germany
Secure checkout, automotive-focused design, and a dedicated solution for extending dashcam parking-mode recording time.
3 reasons to choose this product
The 6200LFP PLUS is purpose-built for dashcam parking mode, combining fast recharge, dedicated auxiliary power and long-life LiFePO4 operation in a compact automotive-ready platform.
Recharges fast in real driving
Around 50 minutes in hardwire mode or around 80 minutes in cigar mode means even short daily drives can restore useful parking runtime.
Built for long-term automotive use
LiFePO4 chemistry, active balancing, stable outputs and multi-layer protection make it a more reliable solution than a generic power bank for dashcam installations.
Feature 01
Independent power for real parking mode
Parking mode is one of the most useful dashcam functions, but it can also become one of the fastest ways to weaken or drain a vehicle battery. This product solves that by acting as a dedicated auxiliary power source. While driving, it recharges automatically. When parked, it keeps the camera running from its own battery pack.
- No starter battery drain during parking recording.
- Engine-on automatic charging and engine-off dedicated output.
- Stable 12V and 5V outputs help reduce camera reboots and voltage dips.
- Maintenance-free daily use once installed.
Why users notice it
The benefit is practical rather than theoretical: longer parking coverage, fewer low-voltage worries and a cleaner power path for the dashcam.
Parking philosophy Independent auxiliary battery
Output system Stable 12V / 5V delivery
Vehicle integration Engine-on auto charge
Installation simplified
Push-button terminal connector. No screw terminals. No crimping. No soldering. Just press → insert → release.
Press
Push the integrated release button to open the terminal mechanism.
Insert
Insert the stripped wire into the terminal opening without fighting screw clamps.
Release
The spring mechanism locks the wire securely for cleaner and faster installation.
Expected parking runtime
Real runtime depends on camera power draw, parking-mode behavior, Wi-Fi usage, ambient temperature and cable losses.
| Dashcam setup | Estimated runtime | Best use case |
|---|---|---|
| Single-channel camera | Up to 46 hours | Daily commuters, overnight parking, low-power setups |
| Dual-channel camera | Up to 27 hours | Front + rear parking protection |
| 3-channel camera | Up to 12 hours | Higher-load multi-camera systems |
| Quick top-up example | ~15 min drive ≈ up to 10h single cam | Short urban trips and partial recharges |
Feature 02
Fast charging, pass-through and installer-friendly design
The 6200LFP PLUS is designed around real installation flexibility. It supports both direct hardwire charging and cigar-lighter charging, while pass-through charging allows the dashcam to stay powered during charging.
- Hardwire charging for maximum recharge speed.
- Cigar charging for simpler plug-and-play style setups.
- Pass-through support keeps recording uninterrupted when the vehicle starts.
- Push-button terminal makes cable connection faster and cleaner.
Installer highlights
This product was built to fit proper dashcam installations rather than generic consumer charging scenarios.
Input range DC 5V–32V
Recharge speed ~50 min / ~80 min
Expansion support 14.6V LiFePO4 packs
Protection & reliability
Automotive electronics need more than capacity alone. The 6200LFP PLUS includes multiple protection layers designed to keep charging and output stable in everyday vehicle use.
01
Low-voltage input cut-off
Charging is blocked at low vehicle voltage conditions to help avoid unsafe input behavior.
02
Short-circuit protection
Helps protect both the power bank and connected installation if wiring or load faults occur.
03
Reverse polarity protection
Added protection against incorrect input polarity during installation.
04
Soft-start logic
Controlled current ramping helps reduce harsh inrush behavior during startup and charging transitions.
05
Delay timer
Built-in delay timing helps smooth vehicle-state transitions in typical automotive use.
06
Moisture-protected PCB
Internal board protection and interference-conscious design improve suitability for enclosed vehicle environments.
07
Temperature control
Charging is blocked below 0°C and high-temperature protection engages around 60–65°C.
08
Over-discharge protection
Helps preserve battery health and prevent harmful low-state operation during use.
09
Over-current extension protection
Additional protection logic supports safer use with compatible extension battery packs.
What’s in the box
Everything required for hardwire installation and reliable dashcam parking-mode operation.
6200LFP PLUS unit
Main dashcam power bank
Cigar lighter charger
1.5m Long Cigar Charger
Charging cable
2m hardwire charging cable
Push-button terminal
4-PIN terminal connector
Socket adapter
Car cigarette socket adapter
Manual + warranty
Instruction manual
GND terminal
O-type terminal + insulation
3M adhesive tape
High-bond mounting tape
Fuse leads set
4× leads + 15A fuses
Technical specification
Full electrical, mechanical, thermal and protection specification for the 6200LFP-PLUS smart LiFePO4 battery module.
Model6200LFP-PLUS
ColorBlack (brushed aluminium texture)
Housing materialFull aluminium body with laser marking engraving
Dimensions322 × 89 × 38 mm
Weight1195 g
Battery chemistryLiFePO4 (Lithium Iron Phosphate)
Internal cell combination1 × 4S (4 cells total)
Internal cell equalizerYes, full high and low active balance mode
Internal cell typeCylindrical with safety pressure valve 2.5 MPa
Nominal voltage12.8V
Capacity12.8V / 6200mAh / 79.36Wh
Cycle life5000+ cycles (80% DOD)
Standby modeUltra low power saver mode (<3mA)
Total power off0mA
Connection typeCar cigar lighter or direct hardwire
Country of originMade in Germany
Input voltageDC 5V–32V
Input current6.5A nominal (10A max)
Input transfer efficiency< 92%
Hardwire full charge0% to 100% in 50 minutes
Cigar mode full charge0% to 100% in 80 minutes
Charging temperature0°C to 60°C
Low-temperature protectionYes, at 0°C or less
High-temperature protectionYes, at 65°C or more
Low-temp charge cut-off0°C (red light, no charging)
High-temp charge cut-off60°C (red light, no charging)
Input low-voltage cut-off12V (red light, no charging)
Expansion charging support14.6V LiFePO4 extended battery pack only
Output 1DC 5V @ 3A
Output 1 efficiency< 98%
Output 2DC 11V–14.6V @ 3A
Output 2 efficiency< 99%
Output 3DC 12V ACC @ 2A
Output 3 efficiency< 100% (fused ACC signal)
Runtime – single camera46 hours
Runtime – dual camera27 hours
Runtime – 3CH camera12 hours
External expansion portYes
Extended battery compatibility14.6V LiFePO4 extended battery pack only
Extended pack over-current protection5A+
Short-circuit protectionYes
Reverse polarity protectionYes
Soft startYes
Delay timerYes, 20 sec
Over-discharge protectionYes, 2.65V/cell (~10.6V)
Low-voltage charge cut-offYes, 12V input cut-off
Low-temperature cut-offYes, 0°C
High-temperature cut-offYes, 60°C
Low-temp protection threshold0°C or less
High-temp protection threshold65°C or more
Discharging temperature-30°C to 70°C
Interference-free designYes
PCB moisture protectionInternal PCB coated by moisture protective compound
CertificationEN 62133-2, UN38.3, UN3481, FCC, CE, UK-CA, MSDS, ROHS, German BattG
Warranty period2 years
FAQ
Most important usage and buying questions for Power Core 6200LFP PLUS.
Runtime depends on the camera setup and power draw. The source page states up to 46 hours for a single-channel camera, up to 27 hours for dual-channel setups and up to 12 hours for 3-channel systems.
Around 50 minutes in hardwire mode or around 80 minutes in cigar mode, depending on the selected charging setup.
Yes. The dash cam can remain powered while the battery is charging, so recording is not interrupted when the vehicle starts.
Yes. The system includes an expansion port for dedicated 14.6V LiFePO4 extension battery packs.
LiFePO4 is preferred for automotive auxiliary battery use because of its long cycle life, thermal stability and predictable long-term performance.
Yes. The product is presented at €189 including VAT, with free EU shipping by DHL.
Order / What you get
Everything needed for premium dashcam parking-mode power
Final purchase block with the most important commercial and technical benefits clearly summarized: fast charging, long parking runtime, stable dedicated outputs and installer-friendly accessory support.
- 79.36Wh LiFePO4 capacity for independent parking recording.
- ~50 min hardwire charging and pass-through support.
- Stable 12V / 5V output architecture with ACC integration support.
- Free EU DHL shipping, secure checkout and 2-year warranty.
What you get
Compact summary panel as the final confidence booster before purchase.
- ProductPower Core 6200LFP PLUS
- Price€189 VAT included
- ShippingFree EU DHL shipping
- AvailabilityIn stock
- Warranty2 years
- OriginMade in Germany
